
MACURCO GBC-24-4 Gas Boiler Controller - 4 Relays 24VAC/VDC
Contact us for price breaks on large quantities!
GAS BOILER CONTROLLER, 24VAC/VDC, 4 RELAYS, NEMA 4X
The Gas Boiler Controller used in conjunction with Macurco Gas detectors is used to shut down boilers in the presence of gas. Using a single detector or up to four gas detectors the controller can control up to 8 dry contact outputs. These outputs are designed to shut down the boiler system upon the detection of carbon monoxide and/or combustible gases such as natural gas or propane. If the detectors are programmed in latching mode then utilizing the Gas Boiler Controller you can reset the power to disengage the latched relay. The Gas Boiler Controller has a green power light, a red alarm light, a boiler reset button, and an audible buzzer.
Specifications:
Application | Boiler, Furnace, Gas Boiler Controller, Temperature Regulation, Safety Monitoring, Efficiency Optimization, Remote Monitoring and Control, Integration with Building Management Systems |
Measurement Range | 0 - 200 ppm |
Display | No |
Output Signal | Voltage |
Size | 9.8" x 8" x 4.5" (24.9 x 20.3 x 11.4 cm) |
Weight | 3 lbs. |
Voltage/Current | 24 VAC/VDC or 120VAC |
Operating Temperature | 32°F to 125°F (0°C to 52°C) |
Ambient Humidity | 0% to 95% RH non-condensing |
Mounting | 6 mounting holes |
Buzzer | 90 dBA at 1 ft |
Status Indicators | Green Light – Powered Up / Red Light – Alarm Condition |
Outputs | Relay Expansion Board – 2 SPDT, 250VAC, 10 A Max (resistive), 4 expansion board capacity (8 total relays) |
Enclosure | NEMA 4X/6P (IP66/68) |
Features:
- Shutdown up to 8 boilers individually via expansion relays
- Customize up to 8 10A SPDT Relays (sets of 2)
- Customize up to 4 expansion relay boards
- 24VDC driver for horn/strobe
- Opaque Polycarbonate, NEMA 4X/6P (IP66/68)
- Audible Buzzer
- Output power supports up to 4 detectors
- 24V or 120V options