The FCI Velociti™ Series, multi-mod ten input monitor module (MMI-10F) provides ten (10), Style B (Class B) or five (5), Style D (Class A) supervised initiating device circuits (IDCs) suitable for a wide range of monitoring applications. The VelocitiTM Series use a communication protocol that substantially increases the speed of communication between the sensors and certain FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs. Each supervised circuit may be connected to any normally open contact device such as manual stations, tamper and supervisory switches, waterflow switches, heat detectors, 4-wire smoke sensors, etc

Features & Specifications

• Condition: New
• Weight : 1.4lb
• Manufacturer : Honeywell
• Brand : GAMEWELL
• Type : Chasis
• Each MMI-10F monitor module provides ten (10), Style B (Class B) or five (5), Style D (Class A) individually addressable, individually programmable initiating device circuits.
• Ideal for applications requiring monitoring of normally open contact devices.
• Removable wiring terminal blocks allow ease of installation and servicing.
• Terminal blocks can accommodate 12 to 18 AWG wire.
• Flexible jumper configuration feature allowing one or two monitoring circuit addresses to be disabled.
• Individual LED indicators.*
• Ideal for retrofit applications.
• As many as sixty (60), initiating device circuits in one (1), 12” x 24” x 6.5” cabinet.
• Two (2), mounting cabinets available for two (2), (MBB-2 cabinet) to six (6), (MBB-6 cabinet) MMO-6RS.
• Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm.* Note: *Only the red LED is operative in panels that do not operate in Velociti™ mode.