POTTER

The PAD100-IM module does not require an SLC loop address but does consume power from the SLC loop. The module provides protection against s...

The PAD100-LEDK provides a mappable key-switch input making it ideal for key control of a variety of system functions. The PAD100-LEDK provi...

The PAD100-MIM is used to monitor the status of an initiating device(s) that contain a normally open set of dry contacts. The module is e...

Additional information Weight 0.6 lbs Dimensions 1.14 × 4.17 × 4.17 in Manufacturer Potter Electric Signal Company, LLC Brand Potte...

The PAD100-PSSA (Single Action) is activated by simply pulling the white “T” bar handle down. The PAD100-PSDA (Dual Action) is activated by ...

The PAD100-PSSA (Single Action) is activated by simply pulling the white “T” bar handle down. The PAD100-PSDA (Dual Action) is activated by ...

The PAD100-RM uses one (1) SLC loop address to provide one (1) Form C relay contact. The module mounts on either a 4” square or double gang box. Th...

The Addressable Sounder Base 6” (PAD100-SB) is a sounder base that may be utilized in a variety of applications. The base has a locking feat...

The PAD100-SIM uses one (1) SLC loop addresses when monitoring one (1) Class B circuit. The module mounts on either a 4” square or double ga...

The Signaling Line Circuit expander PAD100-SLCE allows up to thirty one additional loops. Each loop adds 127 addressable sensors or modules ...

The PAD100-TRTI uses one (1) SLC loop address when monitoring two (2) Class B circuits or one (1) Class A circuit. The PAD100-TRTI also prov...

The PAD200-DUCT is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air sa...

Additional information Weight 2 lbs Dimensions 13.50 × 4.50 × 2.25 in Manufacturer Potter Electric Signal Company, LLC Brand Potter ...

Additional information Weight 0.4 lbs Manufacturer Potter Electric Signal Company, LLC Brand Potter Condition New Unit of Measurem...

The Photoelectric Smoke Sensor and the Carbon Monoxide (CO) sensor are both listed Analog Addressable sensors compatible with fire alarm con...

The PAD200-PD Photoelectric Smoke Sensor is a listed Analog Addressable smoke sensor compatible with fire alarm control panels that utilize the...

Additional information Weight 0.4 lbs Dimensions 3.93 × 3.93 × 1.94 in Manufacturer Potter Electric Signal Company, LLC Brand Potter ...

PAD300-4DB POTTER 4? Detector Base The PAD300-6DB and PAD300-4DB are low-profile, surface-mount bases used with Potter’s addressable detectors. Th...

PAD300-6DB POTTER 6” Detector Base The PAD300-6DB and PAD300-4DB are low-profile, surface-mount bases used with Potter’s addressable detectors. Th...

The PAD300-CD is an analog addressable carbon monoxide (CO) detector compatible with any fire alarm control panel that has the Potter Addres...

The PAD300-DD is an analog addressable photoelectric duct smoke detector (in duct) or mounted in the PAD300-DUCT or PAD300- DUCTR with sampl...

The PAD300-DUCT is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air sa...

The PAD300-DUCTR is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air s...

The PAD300-HD is a listed analog addressable rate of rise and/or fixed temperature heat detector compatible with any fire alarm control panel t...